- Posts: 1
- Joined: Wed Feb 15, 2017 7:43 am
I have two Ultimarc Ultra-Stick controllers. Neither seem to be showing under the Workplaces/System/Shares or USB Tree. They are connected via a USB 3 Hub. I could see and use the controllers though in either of the workstations that was currently active (had focus using the keyboard/mouse switcher). Using Windows Game Controllers setup configuration in each workplace actually showed the controllers flipping back and forth between the two workstations as I switched focus (with a small delay).
I managed to assign the controllers to just one workspace by assigning the hub that I thought the controllers would be attached to to the proper workspace. This fixed the problem and something I wanted to do anyway so that any device plugged into the hub would be recognized by the proper workspace.
I have been using Aster for over a year now and love it!
Windows 10 Pro 64-bit 1803(17134.254)
Intel Core i7-5820K
ASUS Radeon RX 580 (Workstation 1)
ASUS Radeon RX 480 (Workstation 2)
2 x Ultimarc Ultra-Stick controllers
USB 3 HUB
- Posts: 71
- Joined: Sun Sep 21, 2014 2:52 pm
Please send the technical report from the ASTER program with option "Basic system information". In the message, describe the problem and what drivers are used for the controller.
- Posts: 5
- Joined: Fri Nov 09, 2018 1:08 pm
My xbox one s wireless controller is connected through a hub using a 2.4G receiver. assigning the hub to one of the terminal works...sometimes.
when using controller supported windows app or appx, the controller is picked up by both terminals. I actually do not know how to solve it.
Who is online
Users browsing this forum: No registered users and 1 guest